20 Christmas Mini Light Strings Replacement Glass Fuses 3A 3 Amp 110V 125V 20pcs

Description: MPN: 67610 Brand: Tech World Type: Fuses Replacement Fuses for Indoor Christmas Lights 3A 110-125V 3.5mm x 10mm In-plug type The fuses are 10mm long and 3.5mm diameter. Size may vary slightly and still be compatible (+-1mm) These are mini sized fuses. These are for modern lights. They fit inside the plug itself. Check your lights by looking at the plug. The rating for your lights should be printed on the plug, molded into the plastic plug, or on a tag attached to the plug. Compatible with lights marked 110V/115V/120V/125V and 3A or 3 amps Compatible with modern indoor and outdoor lights and some vintage lights such as Kodak Color of Christmas lights NOT compatible with 5A or 7A used on C7, C9 Outdoor Lights NOT compatible with 240V lights. The green lighting plug is not included. Santa and his reindeer are very busy and are also not included. Fuse appearance may vary slightly from photos. Bulk packaged. Replaces: W11A0742-A, MAS-3, BP/MAS-3A, BP/MAS-3X5, 1267-88, 051712741569, 7675739, V1267-87, 883624112676, 202895780, 358745 Important: These are fuses. If you plug in new fuses and they blow immediately, you have a problem with your lights. Fuses don't fix those problems, they are electrical protection devices intended to protect you against those problems and prevent damage caused by overloaded electrical lines. Continuing to replace the fuses without fixing the problem will just waste fuses. Fuses protect against fires when you try to run overloaded lights. Make sure you are not chaining multiple lights together and overloading the lights. If you chain strings together, you are increasing the electric current. Too many will overload the fuses. For safest use of strings of lights, plug each string into an outlet or power strip and not into another string. Check for cut, frayed or damaged wires, following the safety instructions provided by the manufacturer of your lights. If the lights continue to overload the fuses, you should remove the lights and install new ones. If you are using a flasher device (a separate device, not the typical blinking or twinkling bulbs), this places additional stress on the fuses. This is normal, but will wear out the fuses quicker than normal (e.g. one year instead of two years). Like light bulbs, fuses wear out over time from the stress of powering on and off. To avoid having to replace fuses after your lights are installed, replace your fuses every year at the start of the season. Commercial customers normally replace fuses whenever bulbs are replaced. Year round users of lights should set a regular bulb and fuse replacement schedule to assure maximum uptime. Fuses are small parts that can present a choking hazard. They should be properly stored away from children and pets. Shipping Terms: Delivery estimates provided by USPS and eBay are estimates ONLY. We ship orders in a timely fashion. Once turned over to the carrier, shipments are sometimes misrouted or delayed by weather, mechanical issues, etc. USPS does not refund for late delivery for Ground, First Class, or Priority Mail. We do not refund shipping charges for late delivery. Plan accordingly.

Price: 8.12 USD

Location: Crystal Lake, Illinois

End Time: 2024-10-03T18:22:28.000Z

Shipping Cost: N/A USD