2009-2013 Ram 2500 3500 4WD Drag Link & Tie Rod Steering For 0-6" Lift Kit

Description: Brand New Drag Link & Tie Rod For 0-6" Lift Kit Description This Heavy Duty steering kit is a larger and stronger, bolt-on replacement for the stock steering. No drilling or reaming of the knuckles is required. It uses the updated factory T-style steering design to eliminate toe-change caused by Y-style steering. Using the factory T-style steering design also results in no induced bump steer inherent with most aftermarket "cross over" steering kits. The Tie Rod also uses low misalignment "wobble stopper" Tie Rod End Boots to prevent unwanted Tie Rod "flop" which results in a dead spot in the steering when changing direction. The complete kit includes a heavy duty Drag Link, heavy duty Tie Rod, and Steering Stabilizer Mount Kit for use with stock or aftermarket steering stabilizers using a 1/2" mounting bolt. Drag Link is bentto clear factory axle bracket. Tie Rod is bent to Clear sway bar mounts and steering pitman arm.Package Content Adjustable Drag Link Bar x1Adjustable Tie Rod Bar x1 Tie Rod Stabilizer Clamp & require hardware x1Digital Installation Guide x1 Installation time is approximately 1-2 hours Compatible Vehicles Ram 2500 2009-2013 4WD Ram 3500 2009-2012 4WD Warranty Lifetime Warranty against any material or workmanship defect, please contact us first if there is an issue Lifting Guide Determine your lift kit requirements based off current stock heights (displayed in green) for both front and rear by measuring from the ground to the bottom of your vehicle's flare. Level to StockLevel to your stock rear measurements by adding appropriate lift to the front of your vehicle.Stock LiftingAdd to both front and rear equally to gain lift while retaining the stock appearance.Leveling LiftAchieve a leveled lift by adding to both front and rear while accounting for the stock difference. Service Guarantee We offer Same day handling on all orders paid before 2pm Pacific Standard Time. Free Priority 1-5 Day shipping. All items purchased hold a 60 day satisfaction guarantee or your money back. Free Return if for any reason you are not satisfy with the item. Please Be Advised Delivery will use supplied address - any changes made may result in a delay in shipment. Vehicle fitment is in accordance with American models; international models may differ and affect proper fitment requirements. Buy MUST contact seller before ordering with any fitment questions. Requests for fitment checks made in order notes will not be satisfied. Also Available Front Lift Kit Rear Lift 10.50 Axle Rear Lift 11.50 Axle Single 2" Lift 2.5" Lift 3" Lift 3.5" Lift 4" Lift 4.5" Lift 5" Lift 1" Lift 1.5" Lift 2" Lift 2.5" Lift 1" Lift 1.5" Lift 2" Lift 2.5" Lift Rear Lift 11.50 Axle Dually Sway Bar Drop Pitman Arm 1" Lift 1.5" Lift 2" Lift 2.5" Lift Recommended For 2-6" Recommended For 3-6" Bump Stop Driveshaft Shim Carrier Bearing Drop Track Bar Drop Recommended For 2-4" Lift Recommended For 2-4" Lift For 2-3" Lift For 3.5-5" Lift Sway Bar End Link Upper & Lower Control Arm Recommended For 0-6" Recommended For 2-3" Recommended For 3.5-5"

Price: 349.99 USD

Location: Chino, California

End Time: 2024-12-02T00:08:37.000Z

Shipping Cost: 0 USD