High-Quality Heavy Duty Battery Terminal Connectors

Description: 【Rugged and Durable】: The battery terminal connector is made of excellent Iron-plated copper, which conducts electricity efficiently and reduces voltage distortion and transmission loss. Rugged and durable, with excellent resistance to rust, oxidation and corrosion. The protective shell is made of hard plastic, tightly waterproof and resistant to wear and tear. 【Widely Applicable】: The positive and negative electrodes have the same appearance, with different hole diameter sizes. The positive pole hole is 0.75 inches (19mm) in diameter and the negative pole is 0.67 inches (17mm). They are suitable for most car models, such as sports cars, minivans, SUVs, large vans, trucks, taxis, etc. Please check if the size matches your car before you buy. 【Common Specification】: In the battery cable terminal clips, the red plastic casing is the positive battery terminal and the black plastic casing is the negative battery terminal, red and black are a pair. We provide two kinds of packaging for you, one pair and two pairs, so that you can choose to buy according to your actual needs. 【Easy to Install】: Each connector comes with a corresponding M8 nut and washer for a secure and quick installation. Easy to remove, easy to clean and take care of, no damage to the original car. Note: Please make sure to connect the correct terminals to the correct polarity. 【Thoughtful Design】: This product is meticulously made with smooth edges and will not scratch your palm. The small size is easy to store and can be put into a car storage bag or door storage compartment for storage and organisation. Stylish and well chosen materials, the silver white clean galvanised surface can effectively enhance the car decoration. Specifications: Material: Iron-plated copper Color: Red(+), Black(-) Positive Hole Diameter: 0.75 inches (19mm) Negative Hole Diameter: 0.67 inches (17mm) Weight: A Pair 85g Size: 0.3 * 1.1 * 2.2 inches (Upper Width * Bottom Width * Height) Package Include: 1 * Red + 1 * Black + 2 * Washer / 2 * Red + 2 * Black + 4 * Washer Installation Steps: 1. Remove the positive and negative terminals from the original battery, first remove the negative terminal, then the positive terminal. 2. Press the battery cable of the nose cable onto the battery clip, note that the battery cable must pass through the sheath before installation. 3. Install the positive pole first, then the negative pole to prevent short circuit. 4. Place the crimped battery clip on the battery pole, tighten the screw to fix the battery clip, the positive pole installation is complete. 5. Install the negative pole in the same way as the positive pole. 💚 Kindly note 💚: If you would like to order more quantity than shown is available, you are welcome to place one order fox maximum available quantity and place one more order again because we always have more, than shows in available items. Regards

Price: 14.99 USD

Location: Denver, Colorado

End Time: 2024-08-20T11:50:54.000Z

Shipping Cost: 0 USD