Siser Easy Puff Metallic 12" by 10 Yards HTV For T-Shirts (Roll)

Description: Easy™ Puff Metallic Heat Transfer VinylPuff and shine that looks divine!Featuring the same fun puffy effect as our standard Easy Puff, Easy Puff Metallic adds a new twist: a brilliant shiny finish! After heat applying, simply peel the carrier hot and heat press a second time to activate the puff. Designs will not only expand into 3D, but they'll also give off a beautiful gold or silver sheen! Perfect for big and bold artwork, Easy Puff Metallic has a unique look unlike anything you've seen before!Easy™ Puff is CPSIA Certified so it's perfect for decorating children's clothing and accessories.Specifications:• PU Composition • 180 Microns/7.09 MilsImportant Application Notes:• Easy Puff Metallic differs from our standard Easy Puff line and REQUIRES a 2-press application process. After the first press, the carrier must be peeled hot and the design should be covered with a cover sheet, then pressed a second time to activate the puff effect.• Because achieving proper, firm pressure is key with Easy Puff, it is not recommended to apply this material with a home iron.• Texture of applied material can vary from lightly textured to heavily textured.CUTTER SETTINGSSiser Romeo & Juliet:Blade: 45°/60°Gram Force: 10-20Offset: .250Speed: 10Cricut Maker:Blade: AutoBlade, Fine-PointSetting: Heat Transfer (Non-Circut)Brother Scan N Cut DX:Blade: AutoBlade Cut Speed: 5Half Cut: AutoSilhouette Cameo 4:Blade: AutoBlade, 3Material: Heat Transfer, SmoothForce: 6Speed: 8Roland GS/GX-24:Blade: 45°Gram Force: 80-90Offset: .250Speed: 30-50 cm/sGraphtec:Blade: 45°Gram Force: 8-9Tool: CB09U+0Speed: 30 cm/sUS Cutter Titan 2 & 3:Blade: 45°/60°Gram Force: 80-85Speed: 300 mm/s*Blade Advancing VariesMimaki CG-60SR IIIBlade: 45°Gram Force: 80Offset: 30Speed: 20-30 cm/sSettings may vary based on blade condition and age of machine.Always perform a test cut prior to cutting designs.APPLICATION INSTRUCTIONSApplication Instructions (home iron)• It is not recommended to apply this material with a home iron.Application Instructions (heat press)• Cover with Heat Transfer Cover Sheet or Multipurpose Paper• Preheat garment for 2-3 seconds• Apply design at 280°F/138°C• Use medium pressure for 10 seconds• Peel carrier hot• Use medium pressure for 10 additional seconds• If areas of design lift after application, replace cover sheet and re-press for 5~10 secondsRECOMMENDED ACCESSORIES & CAREEasy Puff Metallic Applies to:100% cottonPoly/cotton blends100% polyesterRecommended Accessories:Siser WeederLaundering:Wait 24 hours before 1st washMachine wash cold / mild detergentDry on normal dryer settingDo not dry clean

Price: 78.42 USD

Location: US

End Time: 2024-12-09T19:01:48.000Z

Shipping Cost: 0 USD